Toshiba A10 manual Replacing 15.0 Inch LG.Philips fluorescent lamp SXGA+

4 Replacement Procedures 4.18 Fluorescent Lamp

4.Stick the out side tape and cover shield.

1)Install the tape shield and adhesive tape to fix the top case. Be careful not to apply excessive force to the top case.

2)Install the cover shield (C). Be careful not to apply excessive force to the control PCB.

CAUTION: Wear anti-static gloves to prevent circuit damage caused by ESC.

3)Install the cover shield (G). Be careful not to apply excessive force to the gate TCP.

4)Stick the adhesive tape to fix the B/L wire. Be careful not to apply excessive force to the B/L wire.

Cover shield (C)

Cover shield (G)

Adhesive tape

Adhesive tape Tape shield

Figure 4-143 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (8)

4-138 Satellite A10/TECRA A1/Satelitte Pro A10 Maintenance Manual (960-445)