Toshiba A10 manual Pxe

3 and Diagnostics 3.27 SETUP

(c)Network Boot Protocol

Use this option to set the starting method via a network.

PXE	Sets to PXE protocol. (Default)
RPL	Sets to RPL protocol.

6.Display

This group of options configures the computer’s display.

(a)Power On Display

This option is used to select the display when booting up.

Auto-SelectedSelects an external monitor if one is connected. Otherwise it selects the internal LCD. (Default)

LED+AnalogRGB Selects both the internal LCD and the external CRT for simultaneous display.

NOTE: When starting the computer in Resume mode, the last configuration is remembered. If data does not appear on the display you are using after starting in Resume mode, pressing Fn+F5.

Pressing Fn+F5 changes the display setting as follows in order: the internal LCD, the external CRT, both the internal LCD and the external CRT and TV display.

You cannot select TV display in HW Setup. To display on a TV screen, use Fn+F5.

When an external CRT display which does not support SVGA mode is connected and "LED+AnalogRGB" is selected, the external display is not displayed.

(b)TV Type

This option allows you to select the type of TV.

NTSC (Japan)	TV in Japanese system (Default)
NTSC (US)	TV in the U.S. system
PAL	TV in Europe system

3-76 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)