Toshiba A1 Replacement Procedures LCD Unit/FL Inverter, Removing the LCD Unit/FL Inverter

4 Replacement Procedures 4.16 LCD Unit/FL Inverter

4.16 LCD Unit/FL Inverter

NOTE: The same part is used for the display hinge that holds the LCD unit, regardless of the LCD size.

Removing the LCD Unit/FL Inverter

The following describes the procedure for removing the LCD unit and FL inverter (See Figure 4-34 to 4-36).

1. Peel off two mask tapes from the front and remove the following screws.

• M2.5x8 THIN BIND screw x2

2.Insert your fingers between the upper edge of the display mask and the LCD and remove the display mask while unlatching the display mask.

Mask tape

THIN BIND M2.5⋅6B

Figure 4-34 Removing Display Mask

4-50 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)