Toshiba A10 manual Replacement Procedures Fluorescent Lamp, Type Supplier Section

4 Replacement Procedures 4.18 Fluorescent Lamp

4.18 Fluorescent Lamp

This system uses LCD modules from the following suppliers. The procedure for replacing the fluorescent lamp is different for each LCD module. Refer to the appropriate procedure.

Type	Part No.	Supplier	Section
14.1 inch	G33C00012110	TMD	4.18.1
(XGA)
	G33C00013110	TMD	4.18.1
	VF2093P01	CHIMEI	4.18.2
	VF2058P01	Samsung	4.18.3
	VF2048P01	Samsung	4.18.4
	VF2062P01	LG.Philips	4.18.5
15.0 inch	G33C0000G110	LG.Philips	4.18.6
(XGA)
	G33C0000L110	Samsung	4.18.7
	G33C0000Q110	Sharp	4.18.8
	G33C0000M110	CHIMEI	4.18.9
15.0 inch	G33C0000R110	LG.Philips	4.18.10
(SXGA+)
	G33C0000N110	Samsung	4.18.11
	G33C0000P110	Sharp	4.18.12

NOTE: - When working with a LCD module, always use a flat, grounded table.

(1)Handle the backlight unit in the environment without dust, such as on the clean bench. Keep the worktable free from any screws or other material that may scratch the LCD surface.

(2)Use an anti-static or protective sheet.

(3)When replacing the FL unit, cover with a finger protector or similar to prevent dirtying or scratching the LCD panel.

(4)Take care when handling the lamp. Excessive force may break the lamp.

(5)Take care not to dirty or deform the lamp reflector.

(6)Ensure always that the power of the LCD module is turned off before connecting or disconnecting cables and connectors.

4-64 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)