Toshiba A10 manual Installing the Fan Module/Cooling Fin/CPU, Installing the CPU

4 Replacement Procedures 4.7 Fan Module/Cooling Fin/CPU

Installing the Fan Module/Cooling Fin/CPU

The following describes the procedure for installing the fan module/cooling fin/CPU (See Figure 4-12 to 4-18).

1.Check that the mark on the cam is in the unlocking position.

2.Attach the CPU to the correct position in the CPU socket.

CAUTION: Place the CPU in such direction as shown below. (Pay attention to the position of the triangle mark on the CPU.)

CPU Socket

CPU

Figure 4-17 Installing the CPU

3.Fix the CPU by rotating clockwise the cam by 90 degrees with a flat-blade screwdriver.

4.If there is already silicon grease on the CPU and fan module, clean it with a cloth. Using a special applicator, apply quarter of scale (0.25ml) of silicon grease evenly on the CPU chip.

4-26 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)