Toshiba A10 manual Replacing 15.0 Inch Sharp fluorescent lamp SXGA+

4.18 Fluorescent Lamp 4 Replacement Procedures

4.Turn the LCD module face down. Remove four screws fixing the board and remove the FPC (G). Open the bent portion of the TCP of the board and remove the backlight.

Screw loosening torque: 0.9kg•cm Screw

Screw

Screw

Open the cap of the connector and	(G) FPC
remove the FPC.

Screw

Figure 4-156 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (4)

Do not hold the edge. Do not hold the edge.

Raise the board and make this condition.

Figure 4-157 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (5)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-147