Toshiba A10 manual Assembling Fluorescent Lamp, Replacing 14 Inch TMD fluorescent lamp

4 Replacement Procedures 4.18 Fluorescent Lamp

4.18.1.2 Assembling Fluorescent Lamp

Putting the double-sided tapes on the bezel

1. Attach the double-sided tape to the reverse side of the bezel, as shown in Figure 4-50.

Reverseベゼsideル裏of面the bezel

from 0.0 to 0.5	bezel.
withintapetolerances	ベゼル開口部より 公差０～０．５の範囲で貼付すること
Attach	openingthe theof
	from

The end of tape must not go beyond the

openingテープ端がベゼofル開bezel口部より.

越えないこと

+0 .2 1(tape0 （width)テープ幅）

Requirements for attaching 両double面テ–ーsidedプ貼tapeり規格

Tape must not go beyond	Double-sided tape
the opening of the bezel.	(4597, Sumitomo 3M)
ベゼル開口部より
テープのはみ出し無きこと	両面テープ：４５９７（住友３Ｍ）
	(tape length)

The end of tape must not go beyond theテーopeningプ端がベゼル開of口部bezelより .

越えないこと

Tapes must not be overlapped.

Figure 4-50 Replacing 14 Inch TMD fluorescent lamp (6)

4-70 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)