Toshiba A10 manual BAT CON Holder Replacement Procedures, Removing the BAT CON Holder

4.12 BAT CON Holder 4 Replacement Procedures

4.12 BAT CON Holder

Removing the BAT CON Holder

The following describes the procedure for removing the BAT CON holder (See Figure 4-28).

1.	Remove the following screws fixing the BAT CON holder.
	• M2.5x8 THIN BIND screw	x2
2.	Remove the BAT CON holder from the system board.

BAT CON Holder

THIN BIND M2.5x8

Figure 4-28 Removing BAT CON Holder

Installing the BAT CON Holder

The following describes the procedure for installing the BAT CON holder (See Figure 4-28).

1.Install the CON holder on the system board.

2.Secure the BAT CON holder with the following screws.

• M2.5x8 THIN BIND screw x2

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-41