Toshiba A10 manual Discard the tapes removed. Do not reuse them

4.18 Fluorescent Lamp 4 Replacement Procedures

4.18.12Replacing the 15.0 Inch SXGA+ Sharp Fluorescent Lamp

CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD module. Be careful not to let dust or other foreign substances into the LCD module.

Disassembling the 15.0-inch SXGA+ Sharp Fluorescent Lamp

To disassemble the 15.0 inch SXGA+ Sharp fluorescent lamp, follow the steps below and refer to Figures 4-153 to 4-162.

1.Turn the LCD module face down, and remove the protection cover S (A), protection cover G (B), fixing tape (C) and fixing tape for lead wire (C).

NOTE: 1) Be careful not to damage the TCP or chips.

2) Discard the tapes removed. Do not reuse them.

(A) Protection cover S

(B) Protection cover (G)

(C) Fixing tape

(C) Fixing tape for lead wire

Figure 4-153 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (1)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-145