Toshiba A10 manual Replacing 15.0 Inch LG.Philips fluorescent lamp SXGA+

4.18 Fluorescent Lamp 4 Replacement Procedures

4.Remove the board assembly, adhesive tape, light guide and cover assembly bottom

(L).

1)Remove the board assembly.

NOTE: This process should be made in a clean room to prevent scratch or particle on polarizer or B/L assembly.

2)Remove the adhesive tape fixing the sheets (four points).

3)Remove the sheets and light guide.

NOTE: No penetration of foreign object is indispensable not to scratch on the surface of each sheet.

4) Remove the two screws fixing the cover assembly bottom (L).

NOTE: Maximum value of torque is 1.5kg•cm.

Board assembly	Adhesive tape
Double-sided tape
Adhesive tape
Double-sided tape

Adhesive tape

Sheets and light guide		Adhesive tape
Screw
	Cover assembly bottom (L)	Screw

Figure 4-139 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (4)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-135