Toshiba A10 manual Replacing the 14.1 Inch XGA LG.Philips Fluorescent Lamp

4.18 Fluorescent Lamp 4 Replacement Procedures

4.18.5 Replacing the 14.1 Inch XGA LG.Philips Fluorescent Lamp

The following describes the procedure for replacing the fluorescent lamp (See Figure 4-82 to Figure 4-89).

Removing the tape and cover shield

1.Remove the adhesive tape fixing the B/L cable (1). Be careful not to apply excessive force to the B/L cable.

2.Remove the adhesive tape (Yupo paper) fixing the top case (2).

3.Remove the cover shield (C) (3). Be careful not to apply excessive force to the LCD controller. Wear anti-static gloves as much as possible to prevent circuit damage caused by ESC.

4.Remove the cover shield (G) (4). Be careful not to apply excessive force to the TCP.

5.Remove the adhesive tape fixing the top case (5, 6). During this step, be careful not to apply excessive force to the top case.

Figure 4-82 Replacing 14.1 Inch LG.Philips fluorescent lamp (1)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-93