Toshiba A10 Printer port LED suspend mode error status 1/3, LED Status Test item Contents

2.4 System Board Troubleshooting 2 Troubleshooting Procedures

Table 2-4 Printer port LED suspend mode error status (1/3)

LED Status	Test item	Contents
		Sets the parallel port to D0 state.
2Bh	Release resources used for identification	(For model supporting the fingerprint
	of fingerprint.	identification)
2Ch	Prohibition of THERMAL DUTY (to
	prevent not generating of SMI).
	When powering-off request from OS is
	required, waiting for the completion of
	dividing process because waiting in
	SUSPEND of Runtime returns the
	process to OS.
	Forced execution of dividing	(Permission of SMI for dividing)
	Waiting for completion of dividing
2Dh	After prohibiting of all SMI, permits I/O
	trap(EHCI) and external SMI.
	Starts dividing to transmit periodically
	extension command (every 25 seconds)
	not to generate time-out of power-off.
	When in recovery from hibernation, turn
	off the power, without doing anything.
	Clears resume/power-off status.
	Storing and initializing of special
	configuration register
	Prohibits clock control.
	Prohibits forced-power-off by detection of
	LB2.
	Recognition of suspending for boot/
	resume
	Branch of resume mode (LED=2EH) or
	boot mode(LED=33H)
2Eh	Powering-off during resuming	Halts HC.
	If in password process, recovers display
	information.
	Starts sequence for storing display
	system.

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 2-31