Samsung BD-EM57C user manual Resolution according to the contents type

Appendix

Selecting the Audio Language

•The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.

•The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available.

•Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in English.

Media Play	Selecting the Subtitle Language
	• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle
	language in the Disc Menu. Press the DISC MENU button.
	• This function depends on the selection of subtitles that are encoded on the disc and
	may not be available on all Blu-ray Discs/DVDs.
	• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray
	Disc has a BONUSVIEW section.
	• This function changes both the primary and secondary subtitles at the same time.
	• The total number of primary and secondary subtitles are displayed respectively.
	• If you press the SUBTITLE button on the remote control, the subtitle bar appears.
	Press the RETURN button to remove the subtitle bar.

Resolution according to the contents type

	Contents Type	Blu-ray Disc	E-contents/	DVD
Setup			Digital contents
	BD Wise	Resolution of Blu-ray Disc	1080@60F	480i
	Auto	Max. Resolution of TV input	Max. Resolution of TV input	Max. Resolution of TV input
	1080p@60F	1080@60F	1080@60F	1080@60F
	(Movie Frame : Off)
Movie Frame : Auto (24Fs)		1080@24F	1080@24F	-
	1080i	1080i	1080i	1080i
	720p	720p	720p	720p
	480p	480p	480p	480p
NOTE
\\	If the TV you connected to the player does not support Movie Frame or the resolution you selected, the
	message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous
	resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for
	15 seconds, and then the resolution will revert to the previous resolution automatically.
\\	If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the
	pbutton on the front of the player for more than 5 seconds. All settings are restored to the factory default.
	Run the Initial Settings procedure again. Then, go to Settings > Display > Resolution in the Menu, and select
	the correct resolution for your TV.
\\	When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format)
	only. Resetting does not affect your network settings, so you should be able to skip Network Setup and Software
	Upgrade.
\\	When the factory default settings are restored, all stored user BD data will be deleted.
\\	The Blu-ray Disc must have the 24 frame feature for the player to use the Movie Frame (24Fs) mode.

30 English