Toshiba A10 manual Pcic Compatible

3.27 SETUP 3 and Diagnostics

10. Drives I/O

This option displays the address and interrupt level for the hard disk drive, CD/DVD- ROM drive and PC card. It is for information only and cannot be changed.

Built-in HDD	The setting for the built-in HDD is displayed.
CD-ROMThe setting for the built-in CD-ROM is displayed.
PC Card	This is displayed, when a PC card type HDD that can boot system is
	inserted to PC card slot.

11. PCI Bus

This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed.

PCI BUS = IRQ10, IRQ11

12.PC Card

This option displays the PC Card Controller mode.

Auto-SelectedUse this setting for all PC Card if you are using Windows 98/2000/XP which support Plug&Play. (Default)

CardBus/16-bitIf you are using Windows for Workgroups or Windows NT 4 or lower or if the card does not work properly with the Auto-Selected setting, use this setting for Card Bus PC card.

PCIC Compatible

If you are using Windows for Workgroups or Windows NT 4 or lower or if the card does not work properly with the Auto-Selected and CardBus/16 bit setting.

13.Peripheral

Use this option to select the peripheral's mode.

(a)Internal Pointing Device

This option enables or disables the touch pad

Enabled	Enables the touch pad. (Default)
Disabled	Disables the touch pad.

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 3-81