Toshiba A10 manual Assembling the 15.0 Inch SXGA+ LG.Philips Fluorescent Lamp

4 Replacement Procedures 4.18 Fluorescent Lamp

Assembling the 15.0 Inch SXGA+ LG.Philips Fluorescent Lamp

To assembling the 15.0 inch SXGA+ LG.Philips fluorescent lamp, follow the steps below and refer to figures 4-100 to 4-103.

1.Install the cover assembly bottom (L), sheets, light guide, adhesive tape and board assembly.

1)Remove the protect sheet from the cover assembly bottom (L).

2)Secure the cover assembly bottom (L) with the two screws.

NOTE: Maximum value of torque is 2.0kg•cm.

3)Install the light guide and sheets. (Secure the reflection sheet with double- sided tape.)

NOTE: No penetration of foreign object is indispensable not to scratch on the surface of the sheets and light guide.

4)Stick the adhesive tape to fix the sheets.

5)Install the board assembly. (Secure the gate PCB with double-sided tape.)

NOTE: Be careful not to apply excessive force to the PCB and TCP.

Board assembly

Adhesive tape

Double-sided tape

Double-sided tape

Adhesive tape Double-sided tape

Double-sided tape

Adhesive tape
Sheets and light guide		Adhesive tape
Screw
		Screw
	Cover assembly bottom (L)

Figure 4-140 Replacing 15.0 Inch LG.Philips fluorescent lamp (SXGA+) (5)

4-136 Satellite A10/TECRA A1/Satelitte Pro A10 Maintenance Manual (960-445)