JVC HM-DH5U manual Other useful functions for recording, Calibration S-VHS/VHS only a, VHS ET a

EN 39

Other useful functions for recording

You can also use the following functions for recording.

•“V. CALIBRATION” (S-VHS/VHS only) (A page 63)

When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.

•Second Audio Recording (A page 64)

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast.

To record a SAP program received, set “2ND AUDIO REC” to “ON” using the menu screen.

NOTES:

When the channel is changed on the VCR;

•The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

•The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast.

•The “SAP STEREO” indication appears when a stereo program is accompanied by SAP sound.

•S-VHS Recording Mode (A page 67)

This VCR allows you to record on a D-VHS and S- VHS tape with VHS picture quality.

•“S-VHS ET” (A page 68)

This function allows you to record on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back on a VCR equipped with the S-VHS ET function.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab