JVC HM-DH5U manual Enter DBS Receiver’s brand, Press FG to move the arrow to Brand, Brand Code

EN 27

EEnter DBS Receiver’s brand

VCR CABLE TV /DBS

Press [FG] to move the arrow to “BRAND”.

Press [D E] to enter the brand code from the following list.

FUNCTION SET UP	TUNER SET UP		INITIAL SET UP
DBS SET UP
INPUT CH			OFF
BRAND			40
TEST MODE
MENU	OK	SELECT WITH ARROW KEYS
EXIT	SELECT	THEN PRESS [OK]

G

E F

BRAND	CODE
JVC (DISH Network)	51
ECHOSTAR (DISH Network)	51
SONY (DSS)	41
RCA (DSS)	40

FEngage test mode

Press [FG] to move the arrow to “TEST MODE”, then press [OK].

The program currently received through the DBS receiver appears for about 10 seconds.

NOTE:

If you do not engage the test mode in step F, “INPUT CH” and “BRAND” are not set.

•If the DBS receiver’s channel changes to 205, setting is complete

NOTES:

Press [D E] to move the arrow to “YES”, then press

FUNCTION SET UP TUNER SET UP		INITIAL SET UP
	DBS SET UP

• The Controller may not work with all types of DBS receiver.

• If your DBS receiver does not respond to the code, you cannot

use the Controller to change satellite channels. In this case,

make sure to leave the DBS receiver turned on and tuned to

the proper channel before the scheduled start time of timer

recording. In addition, if your DBS receiver is equipped with a

timer, you can also use ‘Satellite Auto Recording’ (A page

[OK] and “DBS

RECEIVER CONTROL IS ON” appears on the screen for about 5 seconds

	INPUT CH	OFF
	DID YOUR DBS RECEIVER CHANGE TO
		CHANNEL 205?
	YES	NO
MENU	OK	SELECT WITH ARROW KEYS
EXIT	SELECT	THEN PRESS [OK]

47).

• The VCR can only change the satellite channel through the

Controller during timer recording.

• If your DBS receiver cannot be operated with a Remote

(because it has no remote sensor), you cannot use the

Controller to change its channels. Make sure to leave the DBS

receiver turned on and tuned to the proper channel before the

scheduled start time of timer recording.

• For customers in U.S.A.: If you are unable to set the

Controller, contact JVC toll free at 1-800-252-5722.

•If the DBS receiver’s channel does not change as shown above

A Press [D E] to move the arrow to “NO”. B Press [OK].

C Re-enter the correct code.

GReturn to normal screen

Press [MENU].