EN 29
Basic Playback
AChecking tape position
Features
•Turn on the VCR and the TV, and select the AV mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].
The tape position indicator appears on the screen in the following cases:
•When you change the VCR operation mode from the stop mode to fast forward or rewind mode.
•When you perform an Index Search (A page 31).
B | E |
|
| [PLAY(I)] |
E | B C | E |
F D
[POWER]
VCR CABLE
TV /DBS
| [TIMER ( )] |
| C |
[C.RESET] | G |
[REW (O )] | B E G |
[FF (N)] | |
| [STOP (L )] |
[S] | [T] |
The position of “Z” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.
NOTES:
•“SUPERIMPOSE” must be set to “ON”, or the indicator will not appear (A page 66).
•It may take a few seconds for the tape position indicator to be displayed.
To reset the time counter, press [C. RESET] on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.
BPlaying back tape repeatedly
— Repeat Playback
You can play back a tape repeatedly (50 times).
While playing back a tape, press and hold [PLAY (I)] for more than 5 seconds.
The play indicator [E] on the front display panel starts flashing slowly, and a tape will be played back 50 times.
To stop playback, press [STOP (L)] on the Remote or on the front panel.
NOTE:
For a cassette recorded in
D
