EN 69
JLIP ID Number Setting
•Turn on the VCR and the TV, and select the AV mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].
VCR CABLE
TV /DBS
The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device.
When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number.
The JLIP ID number of this VCR is preset to “1” when shipped from the factory. You can change this number to any other number between 1 to 99.
To change the JLIP ID number of this VCR, follow the procedure below.
AAccess Main Menu screen
Press [MENU].
BSelect JLIP ID Set Up screen
APress [D E] to move the arrow to “INITIAL
SET UP”, then press [G] or [OK].
BPress [D E] to move the arrow to “OTHER”, then press [G] or [OK].
CSet JLIP ID Number
AD
B C
Press [FG] to move the arrow to “JLIP ID”.
Press [D E] to enter the desired ID number.
FUNCTION SET UP | TUNER SET UP | INITIAL SET UP | ||
CLOCK SET |
| GUIDE CHANNEL | OTHER | |
JLIP ID |
| 1 |
| |
LINC |
| AUTO |
| |
RESET NUMBER |
|
| ||
MENU | OK | SELECT WITH ARROW KEYS | ||
EXIT | SELECT | THEN PRESS [OK] |
| |
|
|
| ||
DReturn to normal screen
Press [MENU].
NOTE:
For further details on the JLIP system or devices, consult your nearest JVC dealer.
U.S. customer can contact JVC directly toll free at
