Replacement, Fuser unit gets hot | Panasonic KX-FL501AL, KX-FL501NZ

Replacement

Replacing the toner cartridge and the drum unit!

■When the display shows the following message, replace the toner cartridge.

TONER LOW

or

TONER EMPTY

■We recommend you replace the drum unit every third time you replace the toner cartridge. To check the drum life and quality, please print the printer test list (p. 78).

Model No. KX-FA76A toner cartridge and Model No. KX-FA77A drum unit are available for replacement (p. 10).

Caution:

●The drum unit contains a photosensitive drum. Exposing it to light may damage the drum.

Once you have opened the protection bag:

—Do not expose the drum unit to light for more than 5 minutes. —Do not touch or scratch the green drum surface.

—Do not place the drum unit near dust or dirt, or in a high humidity area. —Do not expose the drum unit to direct sunlight.

●Do not unplug the fax machine to prevent loss of fax documents in memory.

●Do not pour any toner into the toner cartridge.

1	Remove the new toner cartridge from the
1	protection bag. Peel off the seal from the
	toner cartridge.
2	Push the front cover open button then
2	open the front cover.
	Caution:
	The fuser unit gets hot.
	Do not touch it.
3	Tap on the used toner cartridge several
3	times to allow the remaining toner to fall
	into the drum unit. Remove the drum and
	toner unit by holding the two tabs.
	If you replace the toner cartridge and the
	●
	drum unit at the same time, skip to step 6.
4	Turn the two levers on the used toner
4	cartridge firmly.

Used toner cartridge

Seal

New toner cartridge

Front cover

Front cover open button

Fuser unit

Drum and toner unit

Levers

Levers

70

Image 70

Panasonic KX-FL501AL Replacement, Replacing the toner cartridge and the drum unit, Fuser unit gets hot, Do not touch it

Contents

KX-FL501NZ Thank you for purchasing a Panasonic facsimile For your future reference For Australian users Service difficulties InstallationImportant information for Australian users Safety instructions Important safety instructions Toner cartridge Laser radiationFuser unit Drum unit Other Information Table of Contents Copy Accessory information AccessoriesIncluded accessories Model No Usage Specifications Help Help ButtonHelp function Easy Dial Document guides Handset Finding the ControlsOverview Speaker Paper tray Left side of the unit Location ONE-TOUCH Dial Toner cartridge and drum unit SetupSurface Toner save feature Document stacker Paper tray, document stacker and paper stackerPaper tray Paper stacker Recording paper Adding paper KX-FL501AL users Connect to Line ConnectionsKX-FL501NZ users To the single Menu Setting the date and timeDate and time, your logo and facsimile telephone number Menu Easy Dial SET Stop Menu Recall Easy Dial SET Setting your logoHandset Mute To select characters with the dial keypad To select characters using Easy DialDisplay order of characters Setting your facsimile telephone number To correct a mistake To delete a number Ringer volume VolumesAdjusting volumes Handset receiver volume Recall Automatic DiallingStoring names and telephone numbers in ONE-TOUCH Dial Directory Program Storing names and telephone numbers in Easy Dial Editing and erasing a stored name and number Editing a stored name and number Erasing a stored station and item Easy Dial SET Directory Program Stop Using Easy Dial Making a voice call using ONE-TOUCH Dial and Easy DialUsing ONE-TOUCH Dial Lower Dial NAME/TEL NO. Stop Monitor Caller ID Caller ID service from your phone companyHow Caller ID is displayed Monitor NAME/TEL no Viewing and calling back using caller informationCaller ID Search Display while viewing Sample of a Caller ID list Confirming caller information using the Caller ID listPrinting and erasing the Caller ID list Caller ID Print Stop SET For Easy Dial Rotate Easy Dial Storing caller information in ONE-TOUCH Dial and Easy DialEasy Dial Lower SET Caller ID Search Receiving a request for voice contact Voice ContactInitiating voice contact Press Monitor Sending a fax manually ResolutionSending Faxes FAX Start Sending a fax using ONE-TOUCH Dial Easy Dial Stop Resolution Lower ONE-TOUCH Dial FAX Start Minimum size Effective scanning area Document weightDocuments you can send Maximum size Journal report Reports for confirmationSending report Sample of a sending report Manual Broad Broadcast transmissionProgramming the stations Broadcast ONE-TOUCH Adding a new station Easy Dial SET Directory Program Erasing a stored station Sending the same document to pre-programmed parties Easy Dial Stop Resolution FAX Start SETManual Broad Broadcast Setting the unit to receive faxes Receiving Faxes With a PC Remote Fax activation Receiving a fax manually TEL mode Answering all calls manuallyActivating TEL mode Stop FAX Start FAX only mode All calls are received as faxes Activating FAX only mode Using the unit with an answering machine Setting up the fax machine and an answering machine Receiving voice calls How the fax machine and answering machine workReceiving a voice message and fax document in one call Receiving fax calls Call is received TEL/FAX delayed ring count Voice callTo set TEL/FAX mode Silent fax recognition ring count When an extension telephone is connected TEL/FAX delayed ring count Using with an answering machine and computer Extension telephone To switch to the TEL/FAX mode Turning the Auto Answer mode on remotelyTo switch to the FAX only mode Menu SET Distinctive ring service Setting the ring pattern detection Display Pager call when the unit receives a faxWhen your pager receives a pager call Menu Monitor Easy Dial SET REDIAL/PAUSE Copying To select the resolution according to the type of documentCopy Start Stop Collate Resolution Copy Zoom Making a copy To reduce or enlarge a document To collate multiple copies Programming Features SummaryGeneral programming method Programming table Basic featuresError OFF #13 How to set menu optionsTone Bell #23 Advanced features#22 #25 Normal #49 #44#46 #58 FAX only Communication message Error Cause & solution Code Error MessagesReports Display message Cause & solution Display Error Messages Operations Letters on their received Problem Cause & solution Other party complains thatProblem Cause & solution Cannot receive documents Document are distorted or not Problem Cause & solution Problem Cause & solution Cannot select the desiredReceive mode Auto Answer to turn on If a power failure occurs Fuser unit gets hot ReplacementReplacing the toner cartridge and the drum unit Do not touch it Green drum surface Jams When the recording paper has jammed in the unitRecording paper jam When the recording paper was not fed into the unit properly Document jams sending No feeding or multiple feeding occurs while sending Cleaning Cleaning the inside of the unit Remove the drum and toner unit by Reference lists and reports Printed ReportsEasy Dial SET Stop Technical data about this product Drum life SpecificationsToner life Toner life for KX-FA76A Index Index Index Page PFQX1502ZA WM0101NK0