Panasonic KX-FL501NZ manual If a power failure occurs, Using an answering machine cont, Operations

	Operations
Using an answering machine (cont.)
Problem	Cause & solution
I cannot retrieve recorded voice	You did not program your remote access code in your fax
	●
messages on the answering	machine correctly. Program the same code that is
machine from a remote	programmed on the answering machine to the fax machine
location.	with feature #12 (p. 57).
I pressed the remote access	The code may include “#” which is used for certain features
	●
code to access the answering	provided by telephone companies. Change the code on the
machine remotely, but the line	answering machine to another number which does not
was disconnected.	include “#”Also. change the code of the fax machine with
	feature #12 (p. 57).
Callers complain that they	Your answering machine has run out of recording tape.
	●
cannot send a document.	Rewind the tape to record messages.
	You set the answering machine to only give a greeting
	●
	message.

Note for KX-FL501AL users:

●Panasonic Australia operates a toll free Customer Care Centre. Please call 132600 for assistance.

or visit the website www.panasonic <http://www.panasonic.com.au>

Note for KX-FL501NZ users:

●Panasonic New Zealand operates a toll free Customer Support Centre. Please call 0800-Panasonic (0800-726276) for assistance.

If a power failure occurs!

●The unit will not function.

●The unit is not designed for making emergency telephone calls when the power fails.

We recommend that a standard phone which can be used in the case of a power failure be connected to the telephone line at all times.

●Fax transmission and reception will be interrupted.

●If delayed transmission of feature #25 (p. 59) is programmed and the start time has passed during a power failure, transmission will be attempted soon after power is restored.

●If fax documents are stored in memory, they will be lost. When power is restored, a power down report will be printed out stating which contents in memory have been erased.

Sample of a power down report

		POWER DOWN REPORT			POWER DOWN AT:Jan. 05 2001 04:30AM
					RESTARTED AT:Jan. 05 2001 04:31AM
				YOUR LOGO		:
	<< WARNING >>			YOUR FAX NO. :
	CONTENTS HAVE BEEN CLEARED DUE TO POWER DOWN.
	FOR ADDITIONAL INFORMATION, PLEASE SEE THE JOURNAL REPORT.
NO.	OTHER FACSIMILE		MODE	PAGES	FUNCTION
01	<FAX # NOT AVAIL.>		RCV	01	MEMORY RECEIVE

69