Enabled, Enabled | |
Send Number System Digit | Yes |
Send Check Digit | Yes |
Expand | No |
Read 2, 5 Digit Addendum | No, No |
Addendum required | Yes |
Add Addendum Separator | Yes |
Send | No |
Enabled, Enabled | |
Send Induced Country Code DigitYes | |
Send Check Digit | Yes |
Read 2, 5 Digit Addendum | No, No |
Addendum Required | Yes |
Add Addendum Separator | Yes |
Code ID |
|
a | |
b | |
c | |
d | |
Code 39 | e |
Interleaved 2 of 5 | f |
Industrial 2 of 5 | g |
Code 128 | h |
MSI/Plessey | i |
Codabar | j |
Code 11 | k |
Code 93 | l |
BC412 | m |
Data Editing |
|
Edit On/Off | Off |
Unmatched Input | Do Not Send |
Appendix B
MAGNETIC STRIPE DEFAULT SETTINGS
The Omni reader is shipped from the factory with the following mag- netic stripe default settings already programmed:
Magnetic Track Basic Data Format
Track 1: <SS1><T1 Data><ES><CR>*
Track 2: <SS2><T2 Data><ES><CR>*
Track 3: <SS3><T3 Data><ES><Enter>*
where: SS1(start sentinel track 1) = % SS2(start sentinel track 2) = ;
SS3(start sentinel track 3) = ; for ISO, ! for CDL, % for AAMVA ES(end sentinel all tracks) = ?
<Enter> = (CR/LF) key on keyboard
Keyboard Wedge Communication Default Settings
Terminal type: IBM PC/AT
Intercharacter delay: 5 ms
Language: US English
Start or End Sentinel: Characters in encoding format which come before the first data character (start) and after the last data character (end), indicating the beginning and end, respectively, of data.
Track Separator: A designated character which separates data tracks.
Terminator: A designated character which comes at the end of the last track of data, to separate card reads.
LRC: Check character, following end sentinel.
CDL: Old California Drivers License format.
*Note: The <CR> commands shown above for tracks 1 & 2 and 2 & 3 denote the default character for this position, the Track Separator position. The <Enter> command shown for track 3 denotes the default character for this position, the Terminator position.
5 2 | 5 3 |
