ID Tech 60, 25, 50, 30 Interblock Delay, Language, Code/Track ID, Scan Verification, Function Code

Interblock Delay

This is the time period the reader will wait before transmitting the next successive data block. Some host systems need additional time between data blocks to process the information.

B3<ENTER>0 for 0 ms

B3<ENTER>1 for 10 ms

B3<ENTER>2 for 30 ms

B3<ENTER>3 for 100 ms

B3<ENTER>4 for 300 ms

B3<ENTER>5 for 1 second

Language

This selection defines the scan code sent to the host for each charac- ter.

B4 <ENTER>0 for U.S.

B4 <ENTER>1 for U.K.

B4 <ENTER>2 for Swiss

B4 <ENTER>3 for Swedish

B4 <ENTER>4 for Spanish

B4 <ENTER>5 for Norwegian

B4 <ENTER>6 for Italian

B4 <ENTER>7 for German

B4 <ENTER>8 for French

B4 <ENTER>9 for Japanese

Code/Track ID

Each bar code symbology or MSR track can be assigned a CODE ID character. This character is added to the beginning of the scanned data. The host can use this character to ensure that the data received came from the appropriate type of symbol.

B5<ENTER>A for On

B5<ENTER>B for Off

Scan Verification

In order to insure accuracy of scanned data from poor-contrast bar code labels, a second confirmation swipe can be required before the reader will accept the data. When this option is enabled the reader requires the card to be swiped a second time and both swipes are compared. If they match, the data is considered a good read.

B6<ENTER>A for On

B6<ENTER>B for Off

Note: This function applies to bar codes only.

Function Code

The standard computer keyboard contains more keys than are sup- ported by the ASCII code table (such as the F1-F12 function keys). The Omni reader allows the key codes for these functions to be used in message formatting. When this selection is ON, these key codes can be entered from the Function Code Table in Appendix A and be included in the data stream as part of the message string (such as pre/postambles or Code IDs).

B7<ENTER>A for On

B7<ENTER>B for Off

8 9