Base Unit Settings

Note:

L You need to register the handset to the base unit again when you change the security mode, the network key and/or the key index.

See “Registering the handset” on page 133.

L When you use WEP for the network key, set either the Network Key No. 1, No. 2, No. 3 or No. 4 as a key index according to the setting of the wireless LAN card you use. When you do not use WEP, you are suggested to use WPA-PSK/WPA2-PSK as the security mode.

MAC Address Filtering:

This feature allows you to configure the MAC address filtering settings so that devices without the particular MAC address will be filtered.

MAC address filtering is available only for wireless devices. Up to 5 entries can be registered. The first entry is reserved for the handset.

To enable or disable MAC address filtering feature:

1

2

Click [Advanced Setup] on the Top Menu.

Click the [Wireless] tab, then click [MAC Address Filtering].

172For assistance, please visit http://www.panasonic.com/help

Page 172
Image 172
Panasonic KX WP1050 operating instructions MAC Address Filtering, To enable or disable MAC address filtering feature