Base Unit Settings
186 For assistance, please visit http://www.panasonic.com/help
Reset to Factory Default:
The base unit settings can be reset to the base unit’s factory default. See page 201 for the
default settings.
1Click [Advanced Setup] on the Top Menu.
2Click the [Maintenance] tab, then click [Reset to Factory Default].
3Click [Reset to Factory Default] to reset the base unit settings.
LThe confirmation message is displayed.
4Click [OK] in the confirmation dialog box.
LThe base unit begins to restart and the Top Menu is displayed.
Note:
LIn step 4, if the LAN side setting is changed or AP (Bridge) mode is used, the base unit
restart automatically, but the Top Menu is not displayed automatically.
You need to click to the link shown on the Restarting page to access to the Top Menu.
LYou need to register the handset to the base unit again when you reset the base unit to
factory default.
See “Registering the handset” on page 133.
WP1050.book Page 186 Wednesday, November 22, 2006 9:24 AM