Base Unit Settings

3 Configure the settings, then click [Save].

 

 

 

 

Setting

Description

 

[IP Address]

L Enter the IP address and subnet mask corresponding to your

 

 

local network.

 

 

L Set 4 numbers (0 – 255) separated by periods such as

 

[Subnet Mask]

“192.168.0.253”.

 

 

Note:

 

 

L There are some restrictions on IP address entry. For

 

 

example, “0.0.0.0” and “255.255.255.255” are not available.

 

[DHCP Server]

L This setting assigns IP addresses to devices on your LAN.

 

 

Select whether to enable or disable this feature.

 

[Starting IP

L Enter the starting IP address for the DHCP server’s IP

 

Address]

assignment.

 

[Number of

L Enter the number of the leased IP addresses (maximum: 5).

 

Leased IP

The first IP address is assigned to the handset. The

 

Address]

subsequent ones are assigned to computers.

4 Click [Restart].

L The base unit automatically restarts and the Top Menu is displayed.

Note:

L If you change the LAN network settings or DHCP server settings, the entries in the Static DHCP table will be deleted.

L In step 4, if the LAN side setting is changed, you need to change your computer’s setting and click the link shown on the Restarting page.

For assistance, please visit http://www.panasonic.com/help

153

Page 153
Image 153
Panasonic KX WP1050 operating instructions Dhcp Server, Starting IP, Address, Number, Leased IP