Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 171
3Configure the settings, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Setting Description
[Security Mode] LSelect the desired security mode.
LNo Encryption (Open), WEP, WPA-PSK and WPA2-PSK are
available for the wireless devices, including the handset.
Select the desired security mode for your wireless devices
connected to the base unit. Default is set to WEP.
WEP settings
[Network Key] For WEP 64bit:
LEnter the network key containing 5 alphanumeric characters
or 10 hexadecimal characters.
For WEP 128bit:
LEnter the network key containing 13 alphanumeric
characters or 26 hexadecimal characters.
LPress [View] to display the network key.
[Key Index] LSelect [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you
use WEP. The default is set to [Key 1].
WPA-PSK/WPA2-PSK Settings
[Network Key] LEnter the network key (8 – 63 alphanumeric characters) in
this data field.
LPress [View] to display the network key.
[Data Encryption] LSelect the desired data encryption method.
For WPA-PSK
LIf your wireless devices use TKIP, select [TKIP] or
[TKIP+AES].
LIf your wireless devices use AES, select [TKIP+AES].
For WPA2-PSK
LIf your wireless devices use TKIP, select [TKIP+AES].
LIf your wireless devices use AES, select [AES] or
[TKIP+AES].
[Session-Key
renewal interval]
LSet the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week. The default is set to 1800.
WP1050.book Page 171 Wednesday, November 22, 2006 9:24 AM