Base Unit Settings

MAC Address Clone:

This feature allows you to clone the MAC (Media Access Control) address of your computer’s network adaptor onto this product.

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some Internet service providers require that you register the MAC address of your computer’s network adaptor, which was connected to your cable or DSL modem during installation.

In such cases, you will need to re-register the MAC address of the base unit with the Internet service provider, but you can avoid re-registering the MAC address by using this feature. You can copy the MAC address of your computer’s network adaptor to the base unit and use its address for the Internet connection.

1

2

Click [Advanced Setup] on the Top Menu.

Click the [Basic] tab, then click [MAC Address Clone].

Note:

L This feature is not available in AP (Bridge) mode.

150For assistance, please visit http://www.panasonic.com/help

Page 150
Image 150
Panasonic KX WP1050 operating instructions MAC Address Clone