Getting Started
For assistance, please visit http://www.panasonic.com/help 35
1Switch the Mode selector to “HOME”.
2Turn off your computer properly. Unplug your cable or DSL modem’s power cord and
leave the modem turned off for at least 10 minutes to clear its memory. Unplug any
cable connecting the modem to your computer. However, the modem needs to remain
connected to the Internet.
3Make sure the base unit is left unplugged. Connect the included Ethernet cable to the
“WAN” port on the base unit and the Ethernet (LAN) port on the modem.
4Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
your modem from in step 2).
LYou can also connect your computer to the base unit via wireless LAN connection.
5Plug your modem’s power adaptor into an AC outlet.
LWait for your modem’s power light to stop flashing before you go to the next step. (It
may take a few minutes.)
6Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.
LWhen the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.
WP1050.book Page 35 Wednesday, November 22, 2006 9:24 AM