Getting Started

4 Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet (LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged the router from in step 2).

L You can also connect your computer to the base unit via wireless LAN connection.

5 Connect the included AC adaptor cord to the power port on the base unit and an AC outlet.

L When the base unit turns on (The WAN indicator lights in green or amber), the installation is complete.

Router mode - With a MODEM only

If you install the base unit with a modem only, the base unit should be set to Router mode. In Router mode, the base unit assigns IP addresses to network devices (including wireless devices) as a DHCP server. It also protects the network devices from being directly exposed to the WAN. For your connection mode, select [DHCP], [Static] or [PPPoE] in Initialization Setup (page 36).

1

Mode selector

WAN indicator

Base unit

Computer

 

4

To LAN port

2

6

AC cord

Ethernet cable (not included)

To AC outlet

Internet

AC adaptor

 

3

2, 5

 

To WAN port

 

Ethernet cable

Cable or DSL modem

(included)

 

34For assistance, please visit http://www.panasonic.com/help

Page 34
Image 34
Panasonic KX WP1050 operating instructions Router mode With a Modem only, To LAN port