Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 173
3Configure the setting, then click [Save].
4Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
To configure MAC address filtering entry:
1Click [Advanced Setup] on the Top Menu.
2Click the [Wireless] tab, and then click [MAC Address Filtering].
3To add a new entry, click [Add] under the MAC Address Filtering Table heading.
LMAC Address Filtering Setting page is displayed.
Setting Description
[MAC Address
Filtering]
LSelect whether to enable or disable the MAC address filtering
feature.
LIf the MAC address filtering is enabled, only the wireless
device with the registered MAC address can send/receive
data.
WP1050.book Page 173 Wednesday, November 22, 2006 9:24 AM