Panasonic KX WP1050 Setting Description Status, Destination, Network/Mask, Gateway

Base Unit Settings

4 Configure the settings under the Routing Setting heading, then click [Add] to add a new entry.

Setting	Description
[Status]	L Select whether to enable or disable the routing setting.
[Destination	L Enter the network address/netmask for the destination IP
Network/Mask]	address.
	L If you want to set one IP address, enter that IP address in IP
	address field and “32” in netmask field. (e.g. If you want to
	control the packet from 192.168.1.1, enter “192.168.1.1” in IP
	address field and “32” in netmask field.)
	L If you want to set a range of IP addresses, enter that network
	address in IP address field and it’s netmask in netmask field.
	(e.g. If you want to control the packet from 192.168.1.0 -
	192.168.1.255, enter “192.168.1.0” in IP address field and
	“24” in netmask field.)
[Gateway]	L Enter the gateway IP address.

5 Click [Restart].

L The base unit automatically restarts and the Top Menu is displayed.

Note:

L To edit the setting:

1 Click the desired entry number in step 3.

2 Edit the items in the Routing Setting page.

3 Click [Save].

4 Click [Restart]. L To delete the setting:

1 Click the desired entry number in step 3.

2 Click [Delete] in the Routing Setting page.

3 Click [OK] in the confirmation dialog box.

4 Click [Restart].

L This feature is not available in AP (Bridge) mode.

For assistance, please visit http://www.panasonic.com/help 167