Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 197
LIP address and Subnet Mask under the WAN heading show the current WAN side
settings of the base unit.
LIP address, Subnet mask and Starting IP address (DHCP Server) under the LAN
(settings) heading show the current LAN side settings of the base unit.
1Enter IP address, Subnet Mask and Starting IP address (DHCP Server) under the LAN
(temporary) heading.
LSee also the Help on the LAN (temporary) heading for data entry.
2Click [Apply].
LThe restarting page is displayed when the entered IP address, Subnet mask and
Starting IP address (DHCP Server) are correct.
Setting Description
[IP Address] LEnter the IP address and subnet mask corresponding to your
temporary local network.
LSet the third number (0 – 255) separated by periods different
from that of the WAN, such as “192.168.101.1”
Note:
LThere are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.
[Subnet Mask]
[Static IP Address
(DHCP Server)]
LEnter the starting IP address for the DHCP server’s IP
assignment.
LSet the third number (0 – 255) separated by periods same as
that of the LAN (temporary) you set above, such as
“192.168.101.100”
WP1050.book Page 197 Wednesday, November 22, 2006 9:24 AM