Panasonic KX WP1050 operating instructions Problem Cause/Solution

Useful Information

Problem	Cause/Solution
The Temporary LAN side	L The networks on the WAN side and the LAN side
Network setting page is	overlap (page 196).
displayed.
After clicking [Restart],	L In the case of AP-DHCP mode or LAN network are
the Top Menu is not	changed, Top Menu page is not displayed
displayed.	automatically. Enter the new base unit IP address in the
	web browser’s address bar.
	L When you restart the base unit from wireless computer,
	this problem may occur. In such case, re-enter http://
	192.168.102.1/(the base unit’s default IP address) or
	http://kxwpa.webpage in the address field of the
	browser.
	L Click the web browser’s refresh button.
	L After restarting the computer, access the Setup Menu
	page again.
	L If the Top Menu is still not displayed, restart the
	computer and try again or change the network settings
	of the computer to appropriate values if they are
	manually set.
The setting screen does	L The selector position was switched after the base unit is
not show the hotel mode	turned on.
at the top of the screen in	L Restart the base unit (see page 189).
spite of the mode selector
being switched to the
hotel mode, and vice
versa.
The Initialization Setup	L To make the changed new mode effective, restart the
screen still indicates hotel	base unit (see page 189) after the mode selector
mode after switching the	position is changed.
mode selector to home
mode.
After failing to enter the	L Wait for one minute until the base unit becomes ready
user name and the	and access to http://192.168.102.1/ (the base unit’s
password on a prompt	default IP address) or http://kxwpa.webpage. One
screen for three times	minute interval is intentional to avoid malignant access
successively, the base	to the base unit.
unit does not respond.

216For assistance, please visit http://www.panasonic.com/help