Base Unit Settings
176 For assistance, please visit http://www.panasonic.com/help
WAN Interface Status:
1MAC Address: Show the MAC address of the WAN port.
2Connection Mode: Show the Internet connection mode. (DHCP/
PPPoE/AP/Static)
3Connection Status: Show whether the WAN port is connecting to the
Internet or not.
4IP Address: Show the IP address of the WAN port.
5Subnet Mask: Show the subnet mask of the WAN port.
6Default Gateway: Show the IP address of the default gateway.
7MTU: Show the current MTU value.
8Lease Time: Show DHCP refresh interval time (in second)
assigned by the DHCP server of the WAN side.
This is available in DHCP only.
9DHCP Server: Show the IP address of DHCP server of the WAN
side. This is available in DHCP only.
LAN Interface Status:
jMAC Address: Show the MAC address of the LAN port.
kIP Address: Show the IP address of the LAN port.
lSubnet Mask: Show the subnet mask of the LAN port.
Routing Table:
mRouting Table: Routing table shows the routing.
ARP Table:
nARP Table: ARP (Address Resolution Protocol) table shows
the list of the hosts that are reached directly from
the base unit. Combinations of IP address and
MAC address of each host are shown.
WP1050.book Page 176 Wednesday, November 22, 2006 9:24 AM