Maxtor Built in Digital Video Recorder Motion Setup, Motion Detection Area, Non-highlighted Area

						CHAP. 5 Set Up
		CAMERA ACTIVE SETUP			MOTION CONFIGURATION
	CH	STATUS	LIVE	REC	CHANNEL	01
---------------------------------------------------------------------------					SENSITIVITY GRADE	01
01		ACTIVE	ON	ON
					MOTION DISPLAY TYPE	OFF
02		ACTIVE	ON	ON
03		LOSS	OFF	OFF	RECORD DURATION	05 SEC
04		ACTIVE	ON	OFF

SELECT : ▲▼ ◀▶, & [ENTER]

SELECT ▲▼, CHANGE VALUE : + -

(3)CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER] button to select [ON/OFF]. If it is set at LIVE [OFF] and REC [ON], DVR system records, but does not show live image of set channel.

-STATUS : Shows if image from a specific channel is coming for live display and recording. In normal camera condition, it is ACTIVE, but LOSS is displayed when the cable is disconnected or camera is not working.

-LIVE : Decides whether to show LIVE screen image or not.

-REC : Decides whether to record relevant channel or not.

(4)MOTION SETUP: You can set sensitive of motion detection in 4 steps, motion detection area and others in relation to motion recording in this menu.

(4)-1. MOTION SETUP

-SENSITIVITY GRADE : Adjusts motion detection sensitivity. (LOW, MEDIUM, HIGH, VERY HIGH)

-MOTION DISPLAY TYPE : Showing cells with motion detected differently from cells with no motion .

-RECORD DURATION : Whenever motion is detected and it is set at Motion Recording mode, DVR system records for RECORD DURATION from time motion is detected. (1sec. ~ 99 sec.) (Default duration : 5 sec.)

(4)-2. MOTION MASK SETUP: Set motion detection area. Direction button is for moving and [ENTER] button is for selection, and [MODE] button is for changing mode of MASK SETUP.

-CELL : Move to the location which you want to detect and then press the [ENTER] button. Highlighted cell area means motion detection area.

-ALL ON : Set all cells as detection area. Use [ENTER] button to set.

-ALL OFF : Set all cells as no-detection area. Use [ENTER] button to set.

-BLOCK ON : Select detection area by block. Use [MODE] button and press [ENTER] button to set ON.

-BLOCK OFF : Select un-detection area by block. Use [MODE] button and press [ENTER] button to set ON.

Highlighted Area

(Motion Detection Area)

Non-highlighted Area

(No Motion Detection Area)

23