Maxtor Built in Digital Video Recorder manual Buzzer Setup, Password Setup, System Information

CHAP. 5 Set Up

6)BUZZER SETUP

Set parameters for buzzer (On or Off). Use direction button and [ENTER] button.

KEY BEEP : buzz when button is pressed.

VIDEO LOSS : buzz when video signal is lost.

ALARM ACTIVE : buzz when alarm is activated.

MOTION DETECT : buzz when motion is detected.

User can set all buzzers at On/Off at once by set ALL at ON/OFF.

BUZZER SETUP

ALL	ON
KEY BEEP	ON
VIDEO LOSS	ON
ALARM ACTIVE	ON
MOTION DETECT	ON

SELECT : ▲▼, & [ENTER]

7)PASSWORD SETUP

Set user ID and password.

-Use [UP] and [DOWN] button to move to option and [LEFT] and [RIGHT] button to set user ID.

The password must be consist of 1 to 8 digit number. Just use numbers button from 1 to 10 on the front panel of DVR unit.

-To change password, user must input current password and then input new password. And input again new password to confirm.

-Default value ADMIN : ‘ ‘ (Blank) MANAGER : ‘1’ USER 1 : ‘2”

:

:

USER 8 : ‘9’

	PASSWORD SETUP
USER I D	ADMIN
USER PW	---------------------
NEW PW	---------------------
CONFIRM	---------------------

[K1-K10] INPUT PASSWORD [ENTER] CHANGE PASSWORD

TO EXIT, PRESS [MENU]

※Change the user PASSWORD in the first operation is recommended.

※In case you forgot PASSWORD, contact dealer of DVR to get instruction to enter into menu to set new PASSWORD.

8) SYSTEM INFORMATION

DVR system information including firmware version, hardware version, product ID, etc….

SYSTEM INFORMATION

S/W VERSION	VER 1.0
H/W VERSION	VER 1.0

PRODUCT ID 01S-2039-001008-AR-01

MASTER Maxtor 6Y060L0

SLAVE

CD-R

SAMSUNG CD-R/RW SW-256B

TO EXIT, PRESS [MENU]

25