Maxtor Built in Digital Video Recorder Record Setup, Record Configuration, Multiplex, Super Fine

5-4. RECORD SETUP

This is the most important configuration of the DVR. Enter into SYSTEM MENU-RECORD SETUP and press the [ENTER] button.

1) RECORD CONFIGURATION

Use direction button to move and [-] [+] button to set value.

(1)OVERWRITE : Set overwrite or stop recording when the HDD is full.

(2)MULTIPLEX

-DUPLEX : Playback & Ethernet

-TRIPLEX : Playback & Recording & Ethernet

※Note: DUPLEX MODE is recommended to playback the images at a maximum frame rate.

But, it makes DVR not to record during search.

(3)QUALITY : Set recording picture quality.

Actually it is fixing maximum data size of image for each picture quality in 5 steps as follows.

-BASIC

-NORMAL

-ENHANCED

-FINE

-SUPER FINE: Default quality set by manufacturer

In Emergency recording mode, recording quality is

SUPER FINE.

CHAP. 5 Set Up

RECORD SETUP

RECORD CONFIGURATION

SCHEDULE SETUP

HOLIDAY SETUP

SELECT MENU : ▲▼, & [ENTER]

RECORD CONFIGURATION

OVERWRITE	ON
MULTIPLEX	TRIPLEX
QUALITY	ENHANCED
RESOLUTION	60IPS 720*240
RECORD IN ALARM	1/1X
RECORD IN MOTION	1/1X
CONTINUOUS RECORD	1/1X

SELECT MENU : ▲▼, CHANGE VALUE : + -

To send more images via IP network and longer recording time, set QUALITY at NORMAL or ENHANCED and record at 360x240(360x288).

※Data size of image in PAL system is a little bigger than NTSC system, but the total recording time is same as in NTSC system.

(4)RESOLUTION : Set recording resolution.

- 60 ips at 720x240(NTSC) , 50 ips at 720x288(PAL)

-120 ips at 360x240(NTSC) , 100 ips at 360x288(PAL)

※It is not possible to see those images in full screen mode in playback.

Recording in Dual resolution is recommended for higher recoding speed, and also to send more images via IP network.

(5)RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.

(6)RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.

(7)CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.

Set record speed (skip rate)

- 1/1x, 1/2x, ………. 1/999x record speed

- ex: 1/2x ) R->S->R->S…- ex: 1/3x ) R->S->S->R->S->S->R…

- ex: 1/4x ) R->S->S->S->R->S->S… ( R : RECORD S : SKIP )

- ex : If record resolution is set at 360x240, 1/1x = 120 ips, 1/2x = 60 ips, 1/3x = 40 ips, etc.

26