3. Configure the Access Point
Note: It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned to your computer's network adapter in the subnet of 192.168.1.x. Since the Access Point's default IP address is 192.168.1.100, make sure no other network devices are assigned an IP address of 192.168.1.1. (Refer to the Troubleshooting section on how to configure TCP/IP settings on your PC)
1.Open your web browser, type http://192.168.1.100 in the Address bar, and press Enter.
2.Enter User name and Password, and then click Log in.
User name: admin
By default, there is no password.
3.Click Launch Wireless Setup
Wizard.
4. Click Next.
3
English
