Uniden DSS3450+1 Connecting the Base and Charging the Handset, Connecting to the Phone Line

Connecting the Base and Charging the Handset

1.Connect the AC adapter to the DC IN 9V jack.

2.Connect the AC adapter to a wall outlet that is not controlled by a switch.

3.Place the handset in the base with the LCD screen facing forward.

4.Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

5.Charge your handset at least 15-20 hours before plugging into the phone line.

Note: Use only the supplied AAD-041S adapter with your phone. Do not use any other AC adapter.

Connecting to the Phone Line

Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a standard telephone wall outlet.

High Speed Internet

If your phone line also has High Speed Internet please ensure you are using an approved line filter before connecting the telephone cord.

[17]