Changing the Dial Mode (Australian Model Only)
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone’s settings:
1. | Press [menu/clear]. Select the GLOBAL SETUP menu, and then the |
| DIAL MODE submenu. |
2. Scroll [ ] to select PULSE. | |
3. | Press [select/ ] . You will hear a confirmation tone. |
| If you ever need to change the dial mode back to tone dialing, follow the |
| same procedure, but select TONE in step 2. |
Basic Setup
Setting the Day and Time
To change the day and time shown in the display, follow the steps below.
Note: If you don't press any keys for two minutes when setting the day and time, the phone exits the menu.
1.Press [menu/clear]. Select the GLOBAL SETUP menu, and then the DAY & TIME submenu option.
2.Move the cursor to select the day of the week, and then press [select/ 
].
3.Move the cursor to set the hour, and then press [select/ 
].
4.Move the cursor to set the minute, and then press [select/ 
].
5.Move the cursor to choose AM or PM, and then press [select/ 
]. You will hear a confirmation tone.
[19]
