Answering an Intercom Page
When the intercom page tone sounds, the display shows the ID of the station that is paging.
From the handset, press [ /flash] or [xfer/intercom]. If AutoTalk is on, the handset automatically answers the page when you remove the handset from the cradle. If Any Key Answer is on, press any key of the
From the base, press [int'com/xfer], or [speaker].
To hang up an intercom page from the handset, press [ ].
To hang up an intercom page from the base, press [int'com/xfer].
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to | |
monitor; it will function as a microphone. Another handset can be set to function as a remote speaker, allowing you | |
to monitor sounds in the room. | |
1. | Press [menu/clear] and enter the ROOM MONITOR menu. |
2. | TO ROOM MONITOR appears. |
Select the station you want to monitor by using [ ] or [ ]. | |
3. | Press [select/ ] . ROOM MONITOR appears, and you hear |
4. | sounds in the room where the station is installed. |
To turn off the Room Monitor, press [ ] or return | |
| the handset to the cradle. |
Notes:
This feature only works when both handsets are within the range of
the base.
If the party is out of range, UNAVAILABLE appears in the display, and
the operation is canceled.
While a pair of handsets is in Room/Baby Monitoring, they cannot be used to make or receive calls. Other handsets can still make and receive calls.
[44]
