Symptom | Suggestion |
Can't make or receive calls. | • Make sure that you are not too far from the base. |
| • Make sure the line is not in use. If an outside call is already using a line, you cannot use |
| that line to make another outside call. |
| • Check both ends of the base telephone line cord. |
| • Make sure the AC adapter is plugged into the base and wall outlet. |
| • Disconnect the AC adapter and reconnect. |
| • Change the Digital Security Code (see page 49). |
|
|
Severe noise interference. | • Keep the handset away from microwave ovens, computers, remote control toys, wireless |
| microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical |
| appliances. |
| • Move to another location or turn off the source of interference. |
|
|
The Caller ID does not | • The call was placed through a switchboard. |
display. | • Call your telephone provider to verify your Caller ID service is current. There may be a |
| problem with your Caller ID service. |
|
|
The handset doesn't ring or | • Make sure that you are not too far from the base. |
receive a page. | • Charge the battery in the handset for 15 to 20 hours by placing the handset on the base |
| or charging cradle. |
| • Change the Digital Security Code (see page 49). |
You cannot register the | • Charge the battery pack in the handset for 15 to 20 hours. |
handset at the base. | • Change the Digital Security Code (see page 49). |
|
|
[50]
