![](/images/new-backgrounds/1257770/25777043x1.webp)
Activating Name Tag (POP ID)
The Name Tag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is required from your network provider. There is usually a fee for this service. When the phone rings the received Caller Display number is compared to numbers stored in the phonebook. If there is a match then any name stored with the phonebook number will be displayed.
To turn Name Tag on or off, follow the steps below:
1. Press [menu/clear]. Select the GLOBAL SETUP menu, and then the NAME TAG submenu.
2. Move the cursor to select On or Off.
3. Press [select/ ]. You will hear a confirmation tone.
Activating the Insert 0
This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. To turn Insert 0 on or off, follow the steps below:
1. Press [menu/clear]. Select the GLOBAL SETUP menu, and then the INSERT 0 submenu.
2. Move the cursor to select On or Off.
3. Press [select/ ]. You will hear a confirmation tone.
[22]