Making a DirectLink Call
1. | To call another handset with DirectLink communication, press [ /flash]. |
2. | The display shows TO DIRECTLINK A HANDSET PRESS |
3. | Press the number of the handset you want to call. If the handset is out of range or not using DirectLink |
| communication, the display shows UNAVAILABLE. To answer a DirectLink call, press [ /flash] or if Any Key |
4. | Answer is on, press any key of the |
To exit the DirectLink call, press [ ]. |
Exiting DirectLink Operation
To exit DirectLink communication and return to normal standby, press [menu/clear] and then press [select/ 
] or return the handset to the cradle. DIRECT LINK MODE CANCEL appears in the display.
Making an Intercom Page
Note:
Intercom paging will be cancelled if any of the following things occur:
You receive an outside call or an intercom page while selecting the other handset.
You do not select a handset within 30 seconds.
The party does not answer the page within one minute.
The party is busy.
The party is out of range (UNAVAILABLE appears on the display). [43]
