L5
L6
L7
L8
P4
L5 LED
L6 LED
L7 LED
L8 LED
P4 Push Button
Press P4 until desired material LED illumi- nates. D1 and D2 will show material name only momentarily, and then return to the main display.
.D1 and D2 will show NO PROG or a selection will not be allowed when
there is no program for the process, material, wire diameter, and shielding gas combination.
L5 selection is for carbon steel.
L6 selection is for stainless steel.
L7 selection is for aluminum.
L8 selection is for other wire types not pro- vided by standard selection.
Pressing P2 push button after a selection is made to allow choosing other wire types within the main selection.
SG2/3 allows selecting SG2 or SG3.
CrNi allows selecting 308L, 309L, or 316L.
Al allows selecting AlMg (AlMg5) or AlSi (AlSi5).
Special allows selecting cored wire or spe- cial wire (abbreviations for the different wire types will appear on D1 and D2).
.Be aware that the wire type selection is
retained in the welding process memory until a new selection is made.
L9
L10
L11
L12
P5
L9 LED
L10 LED
L11 LED
L12 LED
P5 Push Button
Press P5 until desired wire diameter LED illuminates. D1 and D2 will show trim in m/ min values.
.D1 and D2 will show NO PROG or a
selection will not be allowed when there is no program for the process, material, wire diameter, and shielding gas combination.
L9 selection is for 0.8 mm diameter wire.
L10 selection is for 1.0 mm diameter wire.
L11 selection is for 1.2 mm diameter wire.
L12 selection is for other wire diameters not provided by standard selection.
Pressing P2 push button after the special selection is made to allow choosing other wire diameters no available by standard selection.
