7Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will ins truct you to disconnect the temporary USB cable so
you can print wirelessly.
8Follow the instructions on the computer screen.
Note: For more information on allowing other computers on the network to use the wireless printer, see the
Networking Guide.
Installing the printer on a wireless network (Macintosh)
Note: Make sure to disconnect the Ethernet cable when installin g the printer on a wireless network.
Prepare to configure the printer
1Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.
3
DEF
6
MNO
9
WXYZ
#
2
ABC
5
JKL
8
TUV
0
1
@
!.
GHI
4
PQRS
7
*
2Locate the printer MAC address.
aFrom the printer control panel, navigate to:
> Reports > > Network Setup Page >
or
> Reports > Network Setup Page
bIn the Standard Network Card section, look for UAA (MAC).
Note: You will need this information later.
Enter the printer information
1Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to either of the following:
•System Preferences > Network > Wi‑Fi
•System Preferences > Network > AirPort
Additional printer setup 37