Lexmark X546DTN, 387, 386, 383, 382 Connecting to a DSL service, Connecting to a PBX or Isdn system

Faxing 89

Connecting to a DSL service

If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment:

1Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2Connect the other end of the telephone cable to the DSL filter.

Note: Your DSL filter may look different than the one in the illustration.

3Connect the DSL filter cable to an active telephone wall jack.

1

3

2

Connecting to a PBX or ISDN system

If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment:

1Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2Connect the other end of the telephone cable to the port designated for fax and telephone use.

Notes:

•Make sure the terminal adapter is set to the correct switch type for your region.

•Depending on the ISDN port assignment, you may have to connect to a specific port.

•When using a PBX, make sure the call waiting tone is off.

•When using a PBX system, dial the outside line prefix before dialing the fax number.

•For more information on using the fax with a PBX system, see the documentation that came with your PBX system.