Connections

ips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

Make sure the Recorder is connected directly to the TV. Tune the TV to the correct video input channel.

Do not connect the Recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system.

Do not connect your Recorder via your VCR. The DVD image could be distorted by the copy protection system.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aerial input socket on your TV set.

RF coaxial connection

Connect the ANTENNA OUT jack on the Recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The ANTENNA OUT jack passes the signal through from the ANTENNA IN jack.

Aerial

Rear of TV

 

 

ANTENNA

AUDIO INPUT

VIDEO

INPUT

 

INPUT

 

LR

 

R

Rear of Recorder

Connections to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

Video connection

Connect the VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable (V).

S-Video connection

Connect the S-VIDEO OUTPUT jack on the Recorder to the S-Video in jack on the TV using the S-Video cable

(S).

Component Video connection

Connect the COMPONENT OUTPUT jacks on the Recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C).

Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the recorder’s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder.

Connect the COMPONENT OUTPUT jacks on the Recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C).

otes

Set the resolution to “576p” by pressing P/SCAN for progressive signal, see page 11.

Progressive scan does not work with the S-VIDEO connection.

If you are using the COMPONENT OUTPUT jacks, but are connecting the unit to a standard (analog) television, set the resolution to “576i”.

Audio (Left/Right) Connection

Connect the left and right AUDIO OUTPUT jacks of the Recorder to the audio left and right IN jacks on the TV using the audio cables (A1 or A2). Do not connect the Recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system.

Rear of TV

S-VIDEO

COMPONENT/PROGRESSIVE

VIDEO

AUDIO INPUT

INPUT

 

SCAN VIDEO INPUT

INPUT

 

 

 

Y

Pb

Pr

 

L

R

S

C

A2

Rear of Recorder

 

V

 

A1

Rear of TV

 

 

S-VIDEO

COMPONENT/PROGRESSIVE

VIDEO

AUDIO INPUT

INPUT

SCAN VIDEO INPUT

INPUT

 

 

YPb Pr

 

LR

14

Page 14
Image 14
NEC NDRV-62 owner manual Connecting to the Aerial, Connections to Your TV