Connections (Continued)

Connecting to an Amplifier

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic

Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1OUTPUT jacks (OPTICAL O or COAXIAL X) to the

corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.Connect one of the Recorder’s DIGITAL AUDIO

2output. (See “Audio Settings” on page 22).You will need to activate the recorder’s digital

ip

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your Recorder

(MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

otes

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

To see the audio format of the current DVD in the on- screen display, press AUDIO.

This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

Rear of Recorder

HOOKUP

O

 

X

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

COAXIAL

L

R

DIGITAL INPUT

DIGITAL INPUT

AUDIO INPUT

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

15

Page 15
Image 15
NEC NDRV-62 Connections Connecting to an Amplifier, Digital Multi-channel sound, Output jacks Optical O or Coaxial X to